UE639 is a EVA grade from USI, regularly exported by Ningbo Xianxunhe New Materials. Typical characteristics: High impact · Low temperature. Typical applications: Sandal, slipper, foam product.
Key typical values of UE639: MFR 2 g/10 min (190°C/2.16kg) · density 0.937 g/cm³ · and tensile strength 16 MPa. All figures are manufacturer typical values for material selection reference — request the original TDS/COA before using them as purchase specifications.
We supply UE639 on FOB Ningbo terms with a 1-ton MOQ and free samples (0.5–2 kg) for lab validation. In-stock grades are dispatched within 48 hours.
| Melt flow index | 2 g/10min | 190°C/2.16kg | ASTM D1238 / ISO 1133 |
|---|---|---|---|
| Density | 0.937 g/cm³ | ASTM D792 / ISO 1183 | |
| Water absorption | 0.05 % | ASTM D570 / ISO 62 |
| Tensile strength | 16 MPa | ASTM D638 / ISO 527 | |
|---|---|---|---|
| Elongation at break | 720 % | ASTM D638 / ISO 527 | |
| Flexural modulus | 52 MPa | ASTM D790 / ISO 178 | |
| Hardness | Shore A 90 | ASTM D785 |
| Melting point | 89 °C | ISO 11357 |
|---|
⚠ Low melting point — keep barrel temperatures low and avoid overheating to prevent sticking.
Values above are industry-typical starting points — fine-tune according to part geometry, wall thickness and equipment.
The melt mass-flow rate of UE639 is 2 g/10 min, tested at 190°C/2.16kg (ISO 1133).
UE639 has a typical density of 0.937 g/cm³ (ISO 1183).
The tensile strength of UE639 is 16 MPa (ISO 527).
UE639 is produced by USI (origin: Taiwan, China). Xianxunhe supplies it as a trading partner with complete export documentation (COA, TDS on request).
Typical applications of UE639: Sandal, slipper, foam product.
MOQ is 1 ton, FOB Ningbo. In-stock grades dispatch within 24–48 hours; free samples (0.5–2 kg) are available for testing.
Datasheet values are compiled from manufacturer data sheets and third-party test reports, for reference only and without warranty of any kind. Please request the official TDS/COA from the manufacturer and test sufficiently before material selection. The COA of the shipped lot prevails.. Note: MFR test conditions may differ between grades and manufacturers, so MFR values are not directly comparable.
Tell us the resin, grade and quantity — we reply with a formal quotation within 12 hours.