D-120 is a ABS grade from Guohan (Zhenjiang), regularly exported by Ningbo Xianxunhe New Materials. Typical characteristics: extra high strength · extrusion grade · good toughness. Typical applications: Suitcases, water tank valves, locomotive parts, extruded profiles.
Key typical values of D-120: MFR 0.7 g/10 min (200°C/5kg) · density 1.04 g/cm³ · and tensile strength 43 MPa. All figures are manufacturer typical values for material selection reference — request the original TDS/COA before using them as purchase specifications.
We supply D-120 on FOB Ningbo terms with a 1-ton MOQ and free samples (0.5–2 kg) for lab validation. In-stock grades are dispatched within 48 hours.
| Melt flow index | 0.7 g/10min | 200°C/5kg | ASTM D1238 / ISO 1133 |
|---|---|---|---|
| Density | 1.04 g/cm³ | ASTM D792 / ISO 1183 | |
| Water absorption | 0.3 % | ASTM D570 / ISO 62 |
| Tensile strength | 43 MPa | ASTM D638 / ISO 527 | |
|---|---|---|---|
| Elongation at break | 25 % | ASTM D638 / ISO 527 | |
| Flexural modulus | 2250 MPa | ASTM D790 / ISO 178 | |
| Flexural strength | 67 MPa | ASTM D790 / ISO 178 | |
| Izod impact, notched | 31 kJ/m² | ASTM D256 / ISO 180 | |
| Hardness | R 106 | ASTM D785 |
| HDT (0.45 MPa) | 88 °C | ASTM D648 / ISO 75 | |
|---|---|---|---|
| Vicat softening point | 96 °C | ASTM D1525 / ISO 306 |
| Gloss | 93 | ASTM D523 |
|---|
⚠ Excessive moisture causes silver streaks — dry thoroughly before molding.
Values above are industry-typical starting points — fine-tune according to part geometry, wall thickness and equipment.
The melt mass-flow rate of D-120 is 0.7 g/10 min, tested at 200°C/5kg (ISO 1133).
D-120 has a typical density of 1.04 g/cm³ (ISO 1183).
The tensile strength of D-120 is 43 MPa (ISO 527).
The notched impact strength of D-120 is approximately 31 kJ/m² (ISO 180/179).
The HDT of D-120 (1.8 MPa, unannealed) is 88 °C (ISO 75).
The Vicat softening temperature of D-120 is 96 °C (ISO 306).
D-120 is produced by Guohan (Zhenjiang) (origin: China). Xianxunhe supplies it as a trading partner with complete export documentation (COA, TDS on request).
Typical applications of D-120: Suitcases, water tank valves, locomotive parts, extruded profiles.
MOQ is 1 ton, FOB Ningbo. In-stock grades dispatch within 24–48 hours; free samples (0.5–2 kg) are available for testing.
Datasheet values are compiled from manufacturer data sheets and third-party test reports, for reference only and without warranty of any kind. Please request the official TDS/COA from the manufacturer and test sufficiently before material selection. The COA of the shipped lot prevails.. Note: MFR test conditions may differ between grades and manufacturers, so MFR values are not directly comparable.
Tell us the resin, grade and quantity — we reply with a formal quotation within 12 hours.