C2800 is a PC/ABS grade from SABIC, regularly exported by Ningbo Xianxunhe New Materials. Typical characteristics: Flame retardant · High impact. Typical applications: Charger housing, socket, TV back cover.
Key typical values of C2800: MFR 15 g/10 min (260°C/2.16kg) · density 1.18 g/cm³ · and tensile strength 54 MPa. All figures are manufacturer typical values for material selection reference — request the original TDS/COA before using them as purchase specifications.
We supply C2800 on FOB Ningbo terms with a 1-ton MOQ and free samples (0.5–2 kg) for lab validation. In-stock grades are dispatched within 48 hours.
| Melt flow index | 15 g/10min | 260°C/2.16kg | ASTM D1238 / ISO 1133 |
|---|---|---|---|
| Density | 1.18 g/cm³ | ASTM D792 / ISO 1183 | |
| Water absorption | 0.2 % | ASTM D570 / ISO 62 |
| Tensile strength | 54 MPa | ASTM D638 / ISO 527 | |
|---|---|---|---|
| Elongation at break | 50 % | ASTM D638 / ISO 527 | |
| Flexural modulus | 2300 MPa | ASTM D790 / ISO 178 | |
| Flexural strength | 80 MPa | ASTM D790 / ISO 178 | |
| Izod impact, notched | 45 kJ/m² | ASTM D256 / ISO 180 | |
| Charpy impact | 50 kJ/m² | ISO 179 | |
| Hardness | R 110 | ASTM D785 |
| HDT (0.45 MPa) | 95 °C | ASTM D648 / ISO 75 | |
|---|---|---|---|
| Vicat softening point | 105 °C | ASTM D1525 / ISO 306 |
⚠ Hygroscopic material — drying is mandatory; residual moisture causes hydrolytic degradation and silver streaks.
Values above are industry-typical starting points — fine-tune according to part geometry, wall thickness and equipment.
The melt mass-flow rate of C2800 is 15 g/10 min, tested at 260°C/2.16kg (ISO 1133).
C2800 has a typical density of 1.18 g/cm³ (ISO 1183).
The tensile strength of C2800 is 54 MPa (ISO 527).
The notched impact strength of C2800 is approximately 45 kJ/m² (ISO 180/179).
The HDT of C2800 (1.8 MPa, unannealed) is 95 °C (ISO 75).
The Vicat softening temperature of C2800 is 105 °C (ISO 306).
C2800 is produced by SABIC (origin: Saudi Arabia). Xianxunhe supplies it as a trading partner with complete export documentation (COA, TDS on request).
Typical applications of C2800: Charger housing, socket, TV back cover.
MOQ is 1 ton, FOB Ningbo. In-stock grades dispatch within 24–48 hours; free samples (0.5–2 kg) are available for testing.
Datasheet values are compiled from manufacturer data sheets and third-party test reports, for reference only and without warranty of any kind. Please request the official TDS/COA from the manufacturer and test sufficiently before material selection. The COA of the shipped lot prevails.. Note: MFR test conditions may differ between grades and manufacturers, so MFR values are not directly comparable.
Tell us the resin, grade and quantity — we reply with a formal quotation within 12 hours.