C1200HF is a PC/ABS grade from SABIC, regularly exported by Ningbo Xianxunhe New Materials. Typical characteristics: High impact · Heat resistant · High flow. Typical applications: Automotive part, thin-wall housing.
Key typical values of C1200HF: MFR 19 g/10 min (260°C/2.16kg) · density 1.15 g/cm³ · and tensile strength 58 MPa. All figures are manufacturer typical values for material selection reference — request the original TDS/COA before using them as purchase specifications.
We supply C1200HF on FOB Ningbo terms with a 1-ton MOQ and free samples (0.5–2 kg) for lab validation. In-stock grades are dispatched within 48 hours.
| Melt flow index | 19 g/10min | 260°C/2.16kg | ASTM D1238 / ISO 1133 |
|---|---|---|---|
| Density | 1.15 g/cm³ | ASTM D792 / ISO 1183 | |
| Water absorption | 0.2 % | ASTM D570 / ISO 62 |
| Tensile strength | 58 MPa | ASTM D638 / ISO 527 | |
|---|---|---|---|
| Elongation at break | 70 % | ASTM D638 / ISO 527 | |
| Flexural modulus | 2350 MPa | ASTM D790 / ISO 178 | |
| Flexural strength | 85 MPa | ASTM D790 / ISO 178 | |
| Izod impact, notched | 55 kJ/m² | ASTM D256 / ISO 180 | |
| Charpy impact | 60 kJ/m² | ISO 179 | |
| Hardness | R 114 | ASTM D785 |
| HDT (0.45 MPa) | 105 °C | ASTM D648 / ISO 75 | |
|---|---|---|---|
| Vicat softening point | 115 °C | ASTM D1525 / ISO 306 |
⚠ Hygroscopic material — drying is mandatory; residual moisture causes hydrolytic degradation and silver streaks.
Values above are industry-typical starting points — fine-tune according to part geometry, wall thickness and equipment.
The melt mass-flow rate of C1200HF is 19 g/10 min, tested at 260°C/2.16kg (ISO 1133).
C1200HF has a typical density of 1.15 g/cm³ (ISO 1183).
The tensile strength of C1200HF is 58 MPa (ISO 527).
The notched impact strength of C1200HF is approximately 55 kJ/m² (ISO 180/179).
The HDT of C1200HF (1.8 MPa, unannealed) is 105 °C (ISO 75).
The Vicat softening temperature of C1200HF is 115 °C (ISO 306).
C1200HF is produced by SABIC (origin: Saudi Arabia). Xianxunhe supplies it as a trading partner with complete export documentation (COA, TDS on request).
Typical applications of C1200HF: Automotive part, thin-wall housing.
MOQ is 1 ton, FOB Ningbo. In-stock grades dispatch within 24–48 hours; free samples (0.5–2 kg) are available for testing.
Datasheet values are compiled from manufacturer data sheets and third-party test reports, for reference only and without warranty of any kind. Please request the official TDS/COA from the manufacturer and test sufficiently before material selection. The COA of the shipped lot prevails.. Note: MFR test conditions may differ between grades and manufacturers, so MFR values are not directly comparable.
Tell us the resin, grade and quantity — we reply with a formal quotation within 12 hours.